TCL HH63 - Page 14

14
Profile management
In this option, you can set up a new APN profile, and edit or delete existing profiles.
Add a new profile
1. Click
New.
2. Input the correct parameters (like profile name, APN and IP type)
for your network operator.
3. Click
Save
.
Edit a profile
1. Select the profile from the profile management list.
2. Click
Edit
to set the parameters.
3. Click
Save
.
Delete a profile
1. Select the profile from the profile management list.
2. Click
Delete
.
NOTE
: The default profile cannot be deleted.
Set as default
1. Select the profile from the profile management list.
2. Click
Set as default
.
Network settings
You can set the network search mode to
Auto, 3G only, 4G/LTE only
, and change the
network mode.
Make sure you click
Apply
after making desired changes.
Wi-Fi
Basic
Configure basic Wi-Fi settings in this option.
SSID SSID is the name of the Wi-Fi network.
SSID Broadcast
This function is enabled by default.
When this function is disabled, other users cannot detect the SSID or
the Wi-Fi name. They need to manually enter SSID to connect to your
CPE network.
Security
The available security modes include
Disable
,
WPA2
,
WPA/WPA2
,
WPA2/WPA3
,
WPA3
.
Encryption
The available option is
AES
.
Wi-Fi Password Check the Wi-Fi password in this item.
Advanced
Configure advanced Wi-Fi settings in this option.
Max. connected
devices
You can decide how many client devices can connect to your CPE
network at a time.