TCL LinkZone

13
Port forwarding
This function enables external users to access FTP and other service within the LAN. This
function is Disabled by default.
URL filtering
In this feature, you can set internet access schedule for the devices on the LinkZone
network, and define which websites the devices can and cannot visit.
UPnP
Universal Plug and Play (UPnP) is a set of networking protocols that allows connected
devices to discover each other and establish functional network services for data sharing,
communications, and entertainment. This function is Disabled by default.
DMZ
If external users cannot access certain network services within the LAN, you can enable the
DMZ function and set a new host IP address. This function is Disabled by default.
4.6 System settings
System settings
Time setting
Current local time
Display the current year, month, day, time, and day of the
week.
Time set mode This function is SNTP auto synchronization by default.
SNTP server
SNTP (Simple Network Time Protocol) is a networking
protocol for clock synchronisation between computer
systems over packet-switched data networks. You can
specify which SNTP servers to use.
Time Zone Set the time zone in the drop-down menu.
Daylight saving time
Daylight saving time is a system of artificially specifying
local time to save energy. The unified time adopted during
the implementation of this system is called "daylight saving
time". This function is Disabled by default.
Modify password
Enter the current password, set the new username and password and click Apply.
Restore factory setting
If you can't access the internet for unknown reasons, or forget the login password, you can
restore the LinkZone to factory settings.