TCL PIXI 5-10 4G VF - Page 15

L2E Repair Document TCL Communication Ltd.
Rev.
VF1300 Level 2E Repair Document
Page
1.0
15/39
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Step3: Take off the 6 screws on the tablet PCBAs (set the torques at 0.7kgf.cm if using electric screw
driver, set the torques at 0.8kgf.cm if using manual screw driver):
Step 4: Pry up the main PCBA, and sub PCBA