31 32
Step 2. Remove the NANO SIM card/microSD card
tray.
Step 3. Position the SIM card and/or microSD card in
the tray correctly, aligning the cutout tab and gently
snap into place. Be sure the edges are aligned.
Step 4. Slide the tray slowly into the SIM tray slot. It
only fits one direction. Do not force into place. Keep
the SIM tool in a safe place for future use.
NOTE: The microSD card is sold separately.
Charge your phone
Charge the battery before using your phone by
inserting the small end of the charging cable into the
charger on page 33.
Charge your phone fully before turning it on and
starting the set up process. Insert the other end of
the USB cable into your wall charger and plug it into
a wall outlet.
To Next Page
Loading...
Need help?
General
