To Next PageTo Next Page
Need help?Do you have a question about the TCL TAC-24CSA/M and is the answer not in the manual?
General| Cooling Capacity | 24000 BTU/h |
|---|---|
| Capacity | 2 Ton |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Type | Split Air Conditioner |
Provides instructions for ordering replacement parts, including necessary information like model number and part name.
Explains the remote controller's functions and button operations for controlling the air conditioner's modes and settings.
Details safety measures like time delay, frost prevention, and high-temperature protection for compressor and fan operation.
Describes how the "I Feel" mode adjusts temperature based on room conditions and user input for personalized comfort.
Explains the system's operation when the COOLING mode is selected, including default temperature and fan speed settings.
Details the operation of the DRY mode, including its initial cooling phase and fan speed control for dehumidification.
Outlines the HEATING mode operation, including automatic temperature settings and fan speed adjustments for warmth.
Explains the defrosting control logic for the outdoor heat exchanger based on pipe temperature sensors and operational time.
Describes the operation when the FAN mode is selected, focusing on fan speed and vane settings for air circulation.
Details the function and timing of the 4-way valve reversal for switching between heating and cooling modes efficiently.
Explains the SLEEP mode operation, including fan speed, temperature adjustments, and automatic shutdown for user comfort.
Covers the rotational frequency feedback control for the indoor fan motor and detects fan lockout conditions.
Describes how the indoor fan speed is automatically adjusted based on room and set temperatures for optimal airflow.
Explains the vane motor drive, positioning, and auto/swing modes for directing airflow effectively.
Provides instructions for setting timer operations to activate or deactivate the air conditioner at specific times.
Details how to operate the unit manually using the emergency switch and the test run function for servicing.
Explains how to set and cancel the auto restart function, which restores previous settings after a power failure.
Describes failure codes, displays, and troubleshooting steps for common sensor or motor failures.
