To Next PageTo Next Page
Need help?Do you have a question about the TCL TAC-24CF/E and is the answer not in the manual?
General| Type | Split AC |
|---|---|
| Cooling Capacity | 24000 BTU |
| Capacity | 2.0 Ton |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor Unit) | 42 dB |
| Noise Level (Outdoor Unit) | 56 dB |
Details the functions and operation of the remote controller for the air conditioner.
Covers safety mechanisms, time delays, and protection controls for compressor and fan.
Explains the 'I Feel' mode operation, including temperature settings based on room conditions.
Details system operation when the COOLING mode is selected and temperature is set.
Describes the DRY mode operation, including initial cooling phase and fan speed control.
Outlines the HEATING mode operation and cold air prevention control.
Covers defrosting control, starting/terminating conditions, and the defrosting time chart.
Explains the assistant thermistor's role in automatically adjusting heating capacity.
Describes the 4-way valve's function and its timing during mode changes and compressor start-up.
Details the SLEEP mode operation, including fan speed, temperature adjustments, and auto-stop.
Explains rotational frequency feedback control and fan motor lock-up detection mechanisms.
Describes how fan speed is automatically controlled based on room and set temperatures.
Covers vane motor drive, positioning, and auto/swing modes for airflow direction control.
Provides instructions for setting timer operations to activate or deactivate the unit at specific times.
Explains the emergency operation switch for testing or use when the remote control is unavailable.
Describes the AUTO RESTART function that restores previous settings after a power failure.
Details how system failures are displayed and the procedures for handling them.
