5.Instructions for Disassembly of Components and Parts
1) Disassembly of display panel:
1. Wear anti-static gloves to pull out the display panel with a sucker, and then press the buckle to remove the
display panel from the panel, taking care not to break the buckle, and then pull out the connector to replace it.
2. When assembling the display panel and the real panel, take care that the spring position of the key on the
display panel shall not be skewed, and the spring shall correspond to the corresponding location ring on the
display panel, otherwise the key will not work.
3. Install it in reverse order during assembly.
To Next Page
Loading...
Need help?
General
