TCL uTC52

u Series Digital PID Controller
Operation Manual
uTC52 uTC72 uTC42 uTC92 uTC62
48x48 72X72 48X96 96X96 96X48
(DIN 1/16) (DIN 3/16) (DIN 1/8) (DIN 1/4) (DIN 1/8)
March 2006
uTC / uPC OpMan
TCL

TCL uTC52 Specifications

General

Brand	TCL
Model	uTC52
Category	Controller
Language	English

Summary

Terminal Arrangement

uTC52 Terminals

Wiring diagram and terminal connections for the uTC52 model.

uTC62 Terminals

Wiring diagram and terminal connections for the uTC62 model.

uTC72 Terminals

Wiring diagram and terminal connections for the uTC72 model.

uTC42 Terminals

Wiring diagram and terminal connections for the uTC42 model.

uTC92 Terminals

Wiring diagram and terminal connections for the uTC92 model.

Operations

Change the Set Value (SV)

Change the Alarm Value

Autotuning (AT)

How to use the autotuning function for PID parameter optimization.

Programmable RAMP SOAK

Parameters

Level 1 (User Level)

Level 2 (PID Level)

Advanced parameters for PID control tuning.

Level 3 (Input Level)

Configuration of input types, calibration, and alarm modes.

Level 4 (SET Level)

Functions for parameter display/hiding and special settings.

Alarm

Alarm mode (ALD1 ALD2 ALD3)

Heater Break Alarm (HBA)

HBA Wiring Example

HBA Function Description

HBA setting procedure

Parameters for HBA function

Error Codes

Modify Input Type (TCRTD)

Modify Input Type: Linear Input (mA,V)

Hardware

Calibration

Procedure for calibrating linear input signals (mA, V).

Modify Output Mode: OUT1 ALARM, OUT1 OUT2

Applications

RAMP & SOAK

1 4 Phase angle control (By SCR module)

1 4 Phase angle control (By TRIAC)

3 4 Phase angle control (By DIODESCR module)

1 4 Zero crossing control (By SCR module)

1 4 Zero crossing control (By TRIAC)

3 4 Zero crossing control (By SCR module)

3 4 Zero crossing control (By TRIAC)

Wiring diagram of PC communication

Diagrams for establishing serial communication with a PC via RS232 and RS485.