TCL uTC92

u Series Digital PID Controller
Operation Manual
uTC52 uTC72 uTC42 uTC92 uTC62
48x48 72X72 48X96 96X96 96X48
(DIN 1/16) (DIN 3/16) (DIN 1/8) (DIN 1/4) (DIN 1/8)
March 2006
uTC / uPC OpMan
TCL

TCL uTC92 Specifications

General

Brand	TCL
Model	uTC92
Category	Controller
Language	English

Summary

Terminal Arrangement

uTC52 Terminals

Wiring diagram and terminal layout for the uTC52 model.

uTC62 Terminals

uTC72 Terminals

uTC42 Terminals

uTC92 Terminals

Operations

Autotuning (AT)

How to use the autotuning function for PID optimization.

Programmable RAMP SOAK

Operation Levels

Parameters

Description of Parameters (Level 2)

Detailed explanation of parameters within the PID Level.

Description of Operation (Program Level)

Alarm

Alarm Mode

Heater Break Alarm (HBA)

HBA Wiring Example

Wiring diagram illustrating the Heater Break Alarm setup.

HBA Setting Procedure

Step-by-step guide for configuring the HBA function.

Parameters for HBA Function

Activated Conditions of HBA

Modify Input Type (TCRTD)

Modify Input Type: Linear Input (mA,V)

Calibration

Modify Output Mode

Applications

RAMP & SOAK

1 Phase Angle Control (SCR)

Wiring and setup for 1-phase angle control using SCR.

1 Phase Angle Control (TRIAC)

Wiring and setup for 1-phase angle control using TRIAC.

3 Phase Angle Control (DIODESCR)

Wiring and setup for 3-phase angle control with DIODE/SCR.

1 Phase Zero Crossing Control (SCR)

Wiring and setup for 1-phase zero crossing control using SCR.

1 Phase Zero Crossing Control (TRIAC)

Wiring and setup for 1-phase zero crossing control using TRIAC.

3 Phase Zero Crossing Control (SCR)

Wiring and setup for 3-phase zero crossing control using SCR.

3 Phase Zero Crossing Control (TRIAC)

Wiring and setup for 3-phase zero crossing control using TRIAC.

3 Wires Proportional Motor Valve Control

Wiring Diagram of PC Communication