TCL uTC92

37
14.2 Calibration：
SET 2.2 = 1
ANL1=0
ANH1=5000
LSPL=0
USPL=5000
Adjusts "ANL1" until PV Display = 0
Inputs 4mA
Inputs 20mA
Adjusts "ANH1" until PV Display = 5000
Inputs 4mA to CHECK LOW
Inputs 20mA to CHECK HIGH
OK ?
Set the range you want：
LOW =LSPL， HIGH =USPL
Ex：Low = -20.0，High = 50.0
SET LSPL = -20.0，USPL = 50.0，DP：000.0
To display ANL1 &
ANH1
at INPUT Level
Return User Level to view
the changing of PV
YES
NO