TCM FB10-7 - TRANSPORTING THE LIFT TRUCK

FUR
SUPERVISUND
|
INSPECTION
IHANSPURIING
ІНЕ
LIFT
1FEUUR
|
m
DESIGNATE
A
REPAIR
AND
ASSEMBLY
SUPERVISOR
1. Preparation
2. Removal
3. Disassembly
Repairs
and
the
mounting
and
dismounting
of
attachments
must
be
performed
under
the
direction
of
a
designated
supervisor.
The
body
and
major
parts
of
the
lift
truck
are
quite
heavy
and
under
very
high
pressure.
Repair
or
assembly
work
undertaken
without
careful
and
thorough
preparation
can
lead
to
a
serious
injury.
1-13
Ш TRANSPORTING THE LIFT TRUCK
Use a level, hard road surface when loading the truck onto or
unloading from a trailer. Be certain that the loading ramps have
sufficient length and width as well as strength. Do not load or unload
the truck when it is raining, unless the ramps are fitted with an anti-
slipping surfaces.
It is safest to use a self-loading trailer truck equipped with a jack
and winch. For loading, tilt the pallet with the jack, attach the winch
to the towing pin of the lift truck, start the engine, and pull it up.
The
operator
must
not
ride
on
the
lift
truck
while
loading
or
unloading.