2-29
Fig. 2.85
Fig. 2.84
Fig. 2.83
■ REINSTALLATION
① Hoist the front guard (1) and place it in the
mounting position in the front of the frame.
40 kg [88 lbs]
② Secure the front guard (1) using the four bolts
(2), spring washers (3) and washers (4) at the
right and left sides of the front guard.
31.4 - 47.1 N-m {3.2 - 4.8 kgf-m}
[23.2 - 34.7 lbf-ft]
③ Install the tilt cylinder piping (1) on the front
guard using the bolts (2).
④ Install the parking brake lever (1) on the front
guard using the bolts (2).
⑤ Connect the wiring to the parking brake
switch.
⑥ Install the brake oil reservoir.
To Next Page
Loading...
