3.5. Connect a PC (cables not included)
Audio cable VGA cable
1. Use a VGA cable to connect the VGA output connector from your PC to the
VGA input connection of your LED TV. Use an audio cable to connect the
audio output connector from the PC to the LED TV.
2. Connect all connections before powering on your LED TV or another
connected device.
3. Press the power button on your remote control to power on the LED TV.
4. Press the FUENTENH\RQWKHUHPRWHFRQWURODQXVHWKHŸRUźEXWWRQVWR
select PC, and press OK.
57
PC AUDIO VGA RJ45
To Next Page
Loading...
Need help?
General
