TD Systems K40DLM7F - Getting Started; Front;Back View

Wall Mounting
The TV is provided with mounting holes for a VESA approved wall mounting bracket
(NOT SUPPLIED). The VESA mounting pattern is 100X100mm/200 x 100mm/200X
200mm. Remove the screws holding the base to the base bracket and lift the base
away (do not remove the base mounting brackets). Mount the VESA bracket using
4 x M6 x 10 isometric threaded screws (not supplied). Do not use screws longer
than 6mm/10mm/10 mm; damage will occur to the internal components.
Caution: Your new TV is heavy; please consult with a professional wall mount
installer to perform this installation.
Four mounting holes
(size M6 screw)
4 Screws
4*15BBH
200mm
200mm
Getting Started
Front/Back View
K40DLM7F
51