TDR ROBIN PRO - User Manual

Questions and Answers

S
Steven KimJul 31, 2025
What to do if my TDR ROBIN PRO does not turn on?
- R
  robertrobinsonJul 31, 2025
  If your TDR Drone isn't turning on, the first thing to check is the battery. It might be too low, so try charging it. Also, make sure the battery is fully plugged in and oriented in the correct direction.
S
Sherry HernandezAug 4, 2025
Why won't the controller for my TDR ROBIN PRO turn on?
- L
  leahariasAug 4, 2025
  If the controller for your TDR Drone isn't turning on, there could be a few reasons: * Ensure the switch is turned on. * Check that the battery is fully plugged in correctly and securely. * The battery power may be too low, so try charging it.
C
Chloe GriffinAug 9, 2025
What to do if TDR ROBIN PRO blades do not spin and LEDs are flashing?
- S
  Sarah OwensAug 9, 2025
  If the blades of your TDR Drone aren't spinning, the drone has difficulty taking off, and the LEDs are flashing, it's likely due to a low battery. Fully recharge the battery and try again.
C
Chelsey MccannAug 13, 2025
How to fix TDR Drones that cannot take photo or video?
- C
  Courtney FreemanAug 13, 2025
  If your TDR Drone cannot take photos or videos, the issue is likely with the Micro SD Card. Ensure the Micro SD Card is fully inserted. If it still doesn't work, try replacing the Micro SD Card.
L
Laura Carter DDSAug 17, 2025
Why is my TDR Drones flying unstable with strong vibration?
- N
  Noah CarrilloAug 17, 2025
  If your TDR Drone is flying unstably or vibrating strongly, it might be due to damaged blades. Replace the blades to resolve this issue.
K
ksmithAug 21, 2025
What to do if TDR ROBIN PRO can not perform 360° Roll and LEDs are flashing?
- M
  Matthew JonesAug 21, 2025
  If your TDR Drone can't perform a 360° roll and the LEDs are flashing, it's likely because the battery power level is too low. Fully recharge the battery.
G
Glenn MendezAug 26, 2025
What to do if TDR ROBIN PRO Drones crashes during 360° Roll?
- S
  Sara ThorntonAug 26, 2025
  If your TDR Drone crashes during a 360° roll, it's likely because there isn't enough space to perform the rolling function. Ensure the drone is at least 9ft from the ground and 9ft away from all other objects in all directions.