21
Bluetooth
All units come with embedded Bluetooth capability—a short-
range wireless communication technology. Devices with
Bluetooth capabilities can exchange information (beam) over a
distance of about 30 feet (10 meters), without requiring a physical
connection.
Bluetooth settings: tap Start / Settings / Connections /
Bluetooth.
Mode: To enable Bluetooth, select the check box Turn on
Bluetooth. If you want other Bluetooth devices to find your
unit, also select the check box Make this device visible to
other devices.
Device: Tap Add new device to search for other Bluetooth
devices. For enhanced security, use passcodes.
COM Ports: Available only for Bluetooth-connected devices
that support serial (COM) connections.
Power: Maintain Bluetooth connections when device is turned
off. When this check box is selected, Bluetooth connections
on your unit are not terminated when your unit is turned off
(suspended). When the unit is turned back on, the Bluetooth
connections are intact, provided the other Bluetooth device is
still connected. (The other device may not have this feature
and may disconnect.) NOTE: Communication cannot occur
with other Bluetooth devices while your unit is suspended.
Power: Allow Bluetooth activity to turn the device on. When
this check box is selected, another Bluetooth device can send
data and your unit will turn on and reply if necessary. NOTE:
It is strongly recommended that your unit be configured to
automatically turn off when not in use. (See the power section
on page 17.) Otherwise, another Bluetooth device could turn
on your unit, transfer data and if your unit does not turn off
again, it will drain your battery.
To Next Page
Loading...