22
Bluetooth file transfer between two units and/or a PC: To
transfer files between two units and/or a PC does not always
require a partnership. (If your PC does require a partnership, see
below.)
1. Confirm Bluetooth is enabled on both units and the receiving
unit is visible.
2. Tap Start / Programs / File Explorer on the unit that is
sending the file. Browse to the file to be sent, and touch and
hold on it. Tap Beam File. Wait for several moments while
the sending unit searches for Bluetooth devices in the vicinity.
3. Select the receiving unit from the list, and tap Tap to send.
Wait a few moments while the file is transferred.
4. The receiving unit will open a window that says “Receiving
Data” and ask if you want to save the file. If you tap Yes, the
file will be saved in the My Documents folder.
Creating a Bluetooth Partnership: Bluetooth partnerships are
required for connections to some PCs, printers, and headphones.
The details of configuring Bluetooth connections vary depending
upon how each Bluetooth device works. Refer to all device
documentation.
1. Tap Start / Settings / Connections / Bluetooth / Mode.
Ensure that both devices have Bluetooth turned on in the
Mode area, are visible and within close range.
2. Tap Start / Settings / Connections / Bluetooth / Devices /
Add new device… Wait a few moments while your unit
searches for Bluetooth devices in the vicinity.
3. Tap the name of the other Bluetooth device and tap Next. For
enhanced security, use passcodes. Enter the same passcode on
the other unit.
4. You can change the name of the other device, if desired and
tap Finish.
Once a partnership has been created, the devices do not need to
be configured as visible any more.
To Next Page
Loading...