23
Bluetooth connection with a PC
1. Ensure that your PC has connectivity software installed. See
Connecting to the PC on page 19.
2. Set up a partnership between your unit and the PC. See above
about creating a partnership. Refer to your PC documentation
for instructions.
3. After a few moments, select the PC from the Device list.
4. Confirm that ActiveSync service is available and place a
check in the check box and tap Finish.
5. Tap Start / Programs / ActiveSync / Menu / Connect via
Bluetooth.
Bluetooth connection with a printer: If the printer is Bluetooth-
enabled via Bluetooth serial profile, it is possible to establish a
Bluetooth connection.
1. Set up a partnership between your unit and the printer. (If the
printer asks to connect to your unit, tap No.) Refer to your
printer documentation to see if a passcode is required and for
instructions.
2. After a few moments, select the printer from the Device list.
3. Confirm that serial port service is available and place a check
in the check box and tap Finish.
4. Tap Start / Programs / ActiveSync / Menu / Connect via
Bluetooth.
NOTE: Windows Mobile 6 does not support printing without
additional third-party software.
Bluetooth-enabled headphone: You can use a Bluetooth stereo
A2DP headphone only. Bluetooth handsfree audio devices that are
typically used with cell phones are not supported.
Troubleshooting Bluetooth connection problems: If your unit
cannot find another Bluetooth device, confirm that the device is
within range (less than 30 feet / 10 meters) and no large objects
obstruct the path of other Bluetooth-enabled devices. Also confirm
that the device is turned on and has been configured to be
discoverable.
To Next Page
Loading...