System 3 1-47
RZ6 Multi I/O Processor
D/AdBRolloffDiagram
This graph shows the dB rolloff for the RZ6 with varying sampling frequencies for the
D/A. The sample delay remains constant for varying frequencies.
D/APowerOutputDiagra m
This graph shows the power output for the RZ6 with varying driving frequencies for
the D/As when driving a four Ohm load. Driving higher impedance loads will reduce
spectral variation.
Signal Noise
115 dB (20 Hz to 80 kHz)
THD
< 0.02% at 1 Watt from 50 Hz to 100 kHz
Noise Floor
20 μV r
ms
Input Impedance
10 kOhm
Output Impedance
1 Ohm
0.5 Ohm ganged
Headphone Output
2 channels
Output Impedance
1 Ohm
Electrostatic Speaker Output
2 channels
Note: For further information on speaker specifications,
“EC1 Technical Specifications” on page 16-12.
To Next Page
