1-51
RZ5 BioAmp Processor
RZ5BioAmpProcessor
RZ5Overview
The RZ5 BioAmp Processor is available with either one or two 400 MHz Sharc
digital signal processors networked on a multiprocessor architecture that features
efficient onboard communication and memory access. The optimized multi-DSP
architecture provides nearly five gigaflops of processing power, making the RZ5 a
versatile solution for real-time processing and simultaneous acquisition.
The RZ5 acquires and processes up to 32 channels of neurophysiological signals in
real-
time. Data can be input from two Medusa preamplifiers at a sampling rate of
~25 kHz. The RZ5 also supports microstimulation applications. The RZ5 can be
used with one of TDT's stimulus isolators (MS16 or MS4) to comprise a complete
microstimulation system. For more information, see “MS4/MS16 Stimulus Isolator” on
page 7-33.
The RZ5 also features eight channels of analog I/O, 24 bits of digital I/O and an
onb
oard monitor speaker with volume control.
PowerandCommunication
The RZ5's Optibit optical interface ensures fast and reliable data transfer from the
RZ5 to the PC and is integrated into the device. Connectors are provided on the
back panel and are color coded for correct wiring. The RZ5’s power supply is also
integrated into the device and is shipped from the factory configured for the desired
voltage setting (110 V or 220V). If you need to change the voltage setting, please
contact TDT support at 386.462.9622 or
support@tdt.com.
The RZ5 is UL compliant, see the
RZ5/RZ5D/RZ6 Operations Manual
for power
and safety information.
SoftwareControl
Software control is implemented with circuit files developed using TDT's RP Visual
Design Studio (RPvdsEx). Circuits are loaded to the processor through TDT run-
To Next Page
