Need help?Do you have a question about the Teac AI-501DA and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Input Impedance | 47 kΩ |
| USB DAC | Yes |
| Headphone Output | Yes |
| Speaker Terminals | Binding Posts |
| Input Sensitivity | 200 mV |
| USB Input | Yes |
| Signal-to-Noise Ratio | 100 dB |
| Digital Inputs | Optical, Coaxial |
| DAC | Burr-Brown PCM1795 |
| Supported USB Sample Rates | 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
| Analog Audio Inputs | RCA x 2 |
| Supported Sampling Rates | Up to 192 kHz |
General safety warnings regarding electric shock, fire hazards, and internal component access.
Precautions for handling and using batteries to prevent leakage, fire, or explosion.
General guidelines for safe operation, handling, and unit placement.
Step-by-step guide for connecting speaker cables to the unit's terminals.
Essential steps for initial operation: minimizing volume, powering on, and selecting input.
Steps for installing the driver and connecting the computer to the unit.
Selecting USB input, powering up, and starting music playback from the computer.
Troubleshooting steps for power, sound output, and headphone issues.
Troubleshooting for remote control, humming noise, and automatic power saving.
Steps for installing, verifying, and setting up the USB audio driver on Windows.
Steps for installing the USB audio driver and playing music on Macintosh.
To Next Page
