Troubleshooting
13
ENGLISH
Specifications
Basic troubleshooting of a cassette tape deck is similar to
troubleshooting of any other electrical or electronic equipment.
Always check the most obvious possible causes first. To give
you a few ideas of what to look for, check the following:
No power
® Is the power cord connected?
No playback when disc is loaded.
® Load the disc with label side up.
® If the disc is dirty, clean the surface of the disc.
No audio output
® Check the connections to the stereo system.
A single tune can only be played.
® If 1/ALL function is engaged, press the 1/ALL button to
stop it.
No program playback.
® If "MEMORY" indicator is off, press the PROGRAM
button.
Mistracing (sound jumping)
® Install the player on a stable place to avoid vibration and
shock.
® If the disc is dirty, clean the surface of the disc.
Hum
® Check the connection of pin-cord plug.
Noise in tuner
® The player might be too close to the tuner. Keep a
reasonable distance, or switch off the player.
Remote control unit operation is impossible.
® Press the power switch of the main unit.
® Insert or change the batteries of the remote control unit.
Caution:
Since the unit incorporates a microcomputer, it may not
operate correctly because of external noise,etc. If this
happens, turn the power switch OFF, then turn it ON again
and restart operations.
CD Player
Pickup:
3 beam tracking system
Encoding:
16 bits linear
Frequency Response:
40 Hz - 20kHz
±
1.5dB
Total Harmonic Distortion:
<0.02 %(1kHz,0dB)
Signal-to-Noise Ratio(S/N):
> 85dB(1kHz,0dB)
Pitch Control:
±
6%
Channel Separation:
80 dB(1kHz,0dB)
Wow and Flutter:
Below measurable limit
General
Power Requirements:
120/230 V AC, 50/60 Hz (General Export Model)
120 V AC, 60 Hz (U.S.A./Canada Model)
230 V AC, 50 Hz (Europe/UK Model)
240 V AC, 50 Hz (Australia Model)
Power Consumption:
12 W
Dimensions
(
W x H x D
)
:
435 x 104 x 290 mm
(
17-1/8" x 4" x 11-7/16"
)
Weight (net):
3.6 kg (7-15/16 Ibs)
Standard Accessories:
Wireless Remote Control Unit (RC-681)
Battery (SUM-3,"AA","R6"type) x 2
… Improvements may result in specification or feature changing
without notice.
… Photos and illustrations may differ slightly from production
models.
To Next Page
Loading...
