Teac CD-RW901SL - Page 11

TASCAM MD-CD1 RS-232C Protocol Specification
10 TEAC Corporation
SHUTTLE
Puts the controlled device in SHUTTLE mode.
SHUTTLE mode will be maintained until a command such as STOP, PLAY, or READY is received.
Command 16
Machine ID 0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Shuttle
Forward
Shuttles in the forward direction.
0 1 Shuttle
Reverse
Shuttles in the backward direction.
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return none
TRAY
Opens or closes the tray of the controlled device.
Command 18
Machine ID 0
Data none
Return none
SKIP
Causes the controlled device to skip tracks.
After skipping, the device will maintain the mode in which it was when the operation began.
Command 1A
Machine ID 0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Track Skip Next Skips to the next track.
0 1 Track Skip
Previous
If the current position is at the beginning of a track,
skips to the beginning of the previous track. If the
current position is not at the beginning of a track, skips
to the beginning of the current track..
1 0 Index Skip Next Skips to the next index.
1 1 Index Skip
Previous
If the current position is index 2 or higher, skips to the
beginning of the previous index.
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return none
CALL
Causes the controlled device to locate to the call point and enter playback-ready mode.
Command 1D
Machine ID 0
Data none
Return none