Load a pre-recorded cassette tape into TAPE ! and a
recordable cassette tape into TAPE
@.
<
You can use normal (Type!) tape only.
1
Press the TAPE button or the FUNCTION button to select
"TAPE".
2
Select the dubbing speed by pressing the DUB SPEED button.
3
high:
Dubbing is performed at high speed.
(You may lose some fidelity during high speed dubbing.
Make a trial recording to verify the audio quality.)
normal:
Dubbing is performed at normal speed.
Press the PAUSE button and the RECORD button of TAPE @.
4
Press the PLAY button of TAPE !.
5
The dubbing starts.
<
Do not select another source during dubbing, or the dubbing
will be interrupted.
<
To stop dubbing, press the STOP buttons of TAPE ! and @.
To Next Page
Loading...
