Teac GF-680 - Setting the Timer 2; Timer Playback

28
Setting the Timer 2
Hold up or down the knob to set the stop time(minutes), and
press the CLOCK ADJ button.
8
Press the DISPLAY button (or leave the unit for 5 seconds).
Now the timer setting is stored in memory.
9
Timer Playback
Set the start time and stop time (see 27 page).
Select a source by pressing the corresponding button.
2
1
< Prepare the source. When you select "TUNER", tune in a
station.
Press the TIMER button.
3
"TIMER" indicator appears on the display.
Press the POWER switch to turn the unit off (standby).
4
When "TAPE" is selected, press the PLAY button of TAPE ! or @.
The unit will turn on and off at the specified time.
<
The timer doesn't work when the unit is turned on manually.
<
When you don't use timer, press the TIMER button to turn it off.
4
2
3
TIMER
ON OFF
STEREO
CLASSIC
ROCK
POPS
FLAT
PLAY
MHz
kHz
2
1
3
REMAINCH REPEAT SHUFFLE
TIMER
AUX
CDTAPE TUNER
ON OFF
STEREO
CLASSIC
ROCK
POPS
FLAT
PLAY
TRACK
MHz
kHz
INTRO
MEMORY
2
1
3
The "minutes" value starts flashing.
REMAINCH REPEAT SHUFFLE
TIMER
AUX
CDTAPE TUNER
ON OFF
STEREO
CLASSIC
ROCK
POPS
FLAT
PLAY
TRACK
MHz
kHz
INTRO
MEMORY
2
1
3
Hold up or down the knob to set the stop time(hour), and press
the CLOCK ADJ button.
7