7
Accessories Included
1. Remote Control
2. Batteries: 2 x AAA
3. Instruction Book
Standby Notifications
If the TV does not receive any input signal (e.g. from an aerial or HDMI source) for 3 minutes, it will go
into standby. When you next switch-on, the following message will be displayed: “TV switched to
stand-by mode automatically because there was no signal for a long time.” Press OK to
continue.
If the TV is on and it isn’t being operated for a while it will go into standby. When you next switch-on,
the following message will be displayed. “TV switched to stand-by mode automatically because
no operation was made for a long time.” Press OK to continue.
To Next Page
Loading...
