24
Internet Connectivity
Wired Connectivity
To connect to a wired network, you must have a modem/router connected to an active broadband
connection.
Connect your PC to your modem/router. This can be a wired or wireless connection.
Connect your TV to your modem/router via an ethernet cable. There is a LAN port at the rear
(back) of your TV.
To configure wired settings please refer to the Network/Internet Settings section in the
System>Settings Menu.
You might be able to connect your TV to your LAN depending on your network’s
configuration. In such a case, use an ethernet cable to connect your TV directly to the network wall
outlet.
Configuring Wired Device Settings
Network Type
The Network Type can be selected as Wired Device, Wireless Device or Disabled, in accordance
with the active connection to the TV set. Select this as Wired Device if you are connecting via an
ethernet.
Internet Speed Test
Highlight Internet Speed Test and press the OK button. The TV will check the internet connection
bandwidth and display the result when complete.
To Next Page
Loading...
