28
Audio Video Sharing
Select the desired media type on the main media browser menu and press OK. If sharing
configurations are set properly, Device Selection screen will be displayed after selecting the desired
media type. If available networks are found, they will be listed on this screen. Select media server or
network that you want to connect to using the Up or Down buttons and press OK. If you want to
refresh the device list, press the Green button. You can press Menu to exit.
If you select the media type as Videos and choose a device from the selection menu. Then select the
folder with video files in it on the next screen and all the available video files will be listed.
To play other media types from this screen, you can go back to main Media Browser screen and
select the media type as desired and then perform the network selection again. Or press the Blue
button to switch to next media type quickly without changing the network. Refer to the Media
Browser menu section for further information on file playback.
If a problem occurs with the network, please switch your television off at the wall socket and back on
again. Trick mode and jump are not supported with the Audio Video Sharing feature.
PC/HDD/Media Player or any other devices that are compatible should be used with a wired
connection for higher playback quality.
Use a LAN connection for quicker file sharing between other devices like computers.
Note: There may be some PCs which may not be able to utilize the Audio Video Sharing feature due to
administrator and security settings (such as business PCs).
Internet Portal
A broadband internet connection is required for high quality viewing. You must set the country option
accordingly in the First Time Installation for proper operation of the internet portal. Portal feature
allows you to connect to a server on the Internet and view the content provided by this server over
your Internet connection and to view the music, video, clip or web content with defined short-cuts.
Whether you can view this content without interruption depends on the connection speed provided by
your internet service provider.
1. Press the Internet button on your remote control to open the internet portal page. You will
see icons of the available applications and services on the portal screen. Use the directional
buttons on your remote to select the desired one. You may view the desired content by
pressing OK after selecting. Press Back/ Return button to return back to the previous screen.
2. Moreover, you can access some features using the short-cut feature defined for the coloured
or numeric buttons of your remote.
3. Press the Exit button to quit the Internet portal mode.
PIP Window (depending on portal service)
Current source content will be displayed in the PIP window, if you switch to portal mode while on any
active source. If you switch to portal mode while watching TV channels, current programme will be
displayed in the PIP window.
Notes:
Possible application dependent problems may be caused by the content service provider.
Portal service content and the interface may be changed at any time without prior notice.
Third party internet services may change, be discontinued or restricted at any time.
Internet Browser
To use the internet browser, enter the portal first. Then launch the Internet application on the portal.
To Next Page
Loading...
