19
Menu Contents and Descriptions
System - Picture Menu
Mode
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options:
Cinema
,
Game
(optional),
Sports
,
Dynamic
and
Natural
.
Dolby Vision Modes:
If Dolby Vision content is detected
Dolby Vision Dark
and
Dolby
Vision Bright
picture mode options will be available instead of
Cinema
and
Natural
modes.
Contrast
Adjusts the light and dark values on the screen
Brightness
Adjusts the brightness values on the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colours.
Energy Saving
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen
Off or Off.
Note: Available options may differ depending on the selected Mode.
Backlight
This setting controls the backlight level. The backlight function will be inactive if the Energy
Saving is set to an option other then Custom.
Advanced
Settings
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Noise
Reduction
If the signal is weak and the picture is noisy, use the Noise Reduction
setting to reduce the amount of noise.
Colour
Temp
Sets the desired colour temperature value. Cool, Normal, Warm and
Custom options are available.
White Point
If the Colour Temp option is set as Custom, this setting will be
available. Increase the ‘warmth’ or ‘coolness’ of the picture by pressing
Left or Right buttons.
Picture
Zoom
Sets the desired image size format.
Film Mode
Films are recorded at a different number of frames per second to
normal television programmes. Turn this feature on when you are
watching films to see the fast motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
HDMI Full
Range
While watching from a HDMI source, this feature will be visible. You
can use this feature to enhance blackness in the picture.
Dolby Vision
Notification
Sets the notification appearance preference for Dolby Vision contents. When set as
On
,
Dolby Vision logo will be displayed on the upper right side of the screen when Dolby Vision
content is detected.
PC Position
Appears only when the input source is set to VGA/PC.
Autoposition
Automatically optimizes the display. Press OK to optimize.
H Position
This item shifts the image horizontally to the right hand side or left hand
side of the screen.
V Position
This item shifts the image vertically towards the top or bottom of the
screen.
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical
banding in dot intensive presentations like spreadsheets or paragraphs
or text in smaller fonts.
Phase
Depending on the input source(computer etc.) you may see a hazy or
noisy picture on the screen. You can use phase to get a clearer picture
by trial and error.
Reset
Resets the picture settings to factory default settings (except Game mode).
Note: While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead,
VGA mode settings will be added to the Picture Settings while in PC mode.
To Next Page
Loading...
