18
Watching Recorded Programmes
1. Select Recordings from the Media Browser menu.
2. Select a recorded item from the list (if previously recorded).
3. Press the OK button to view the Play Options. Select an option then press OK.
4. Press the Stop button to stop a playback and return to the Recordings.
Note: Viewing main menu and menu items will not be available during the playback.
Slow Forward
If you press the Pause button while watching recorded programmes, the slow forward feature will be
available. You can use the Fast Forward button to slow forward. Pressing Fast Forward
consecutively will change the slow forwarding speed.
Recording Configuration
Select Recording Settings in the Media Browser>Settings menu to configure the recording
settings.
Format Disk: You can use the Format Disk feature for formatting the connected USB disk. Your PIN
is required to use the Format Disk feature.
Note: Default PIN can be set to 0000 or 1234.
IMPORTANT: Formatting your USB drive will erase ALL the data on it and it’s file system will be
converted to FAT32. In most cases operation errors will be fixed after a format but you will lose ALL
your data.
If “USB disk writing speed too slow to record” message is displayed on the screen while starting a
recording, try restarting the recording. If you still get the same error, it is possible that your USB disk
does not meet the speed requirements. Try connecting another USB disk.
To Next Page
Loading...
