15
List Schedule(*)
(*) In this layout option, only the events of the highlighted channel will be listed.
Prev. Time Slice (Red button): Displays the events of previous time slice.
• Next/Prev Day (Programme +/- buttons): Displays the events of previous or next day.
• Event Details (Info button): Displays detailed information about selected events.
• Filter (Text button): Views filtering options.
• Next Time Slice (Green button): Displays the events of next time slice.
• Options (OK button): Displays event options.
• Rec./Stop (Record button): The TV will start to record the selected event. You can press
again to stop the recording.
IMPORTANT: Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to
enable the recording feature.
Note: Switching to a different broadcast or source is not available during a recording.
Now/Next Schedule
• Options (OK button): Displays event options.
• Event Details (Info button): Displays detailed information about selected events.
• Filter (Blue button): Views filtering options.
• Rec./Stop (Record button): The TV will start to record the selected events. You can press
again to stop the recording.
IMPORTANT: Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to
enable the recording feature.
Note: Switching to a different broadcast or source is not available during a recording.
Event Options
Use the directional buttons to highlight an event and press OK button to display Event Options
menu. The following options are available.
• Select Channel: Using this option, you can switch to the selected channel.
• Record / Delete Rec. Timer: Select the Record option and press the OK button. If the event
is going to be broadcasted at a future time, it will be added to Timers list to be recorded. If the
selected event is being broadcasted at the moment, recording will start immediately.
• To cancel an already set recording, highlight that event and press the OK button and select
the option Delete Rec. Timer. The recording will be cancelled.
• Set Timer on Event / Delete Timer on Event: After you have selected an event in the EPG
menu, press the OK button. Select Set Timer on Event option and press the OK button. You
can set a timer for future events. To cancel an already set timer, highlight that event and
press the OK button. Then select Delete Timer on Event option. The timer will be cancelled.
Notes: You cannot switch to any other channel or source while there is an active recording or timer on the
current channel.
It is not possible to set timer or record timer for two or more individual events at the same time interval.
To Next Page
Loading...
