15
Time-Shift Recording and Playback (in DTV mode only)
The time-shift function allows you to pause the live TV signal, then resume playback at your
convenience.
1. First, insert your USB memory device into the USB port.
2. When watching a programme in DTV Mode, press the button on the remote
control to initiate time-shift mode and pause the programme; the control bar pictured
below will appear on the screen and will disappear after a few seconds.
3. Press the button again on the remote control to resume playback. (Or press the
OK button to display the on-screen control bar and choose Play.) The TV is still
recording in time-shift mode.
4. To stop time-shift and return the the actual live broadcast, press the STOP button on
the remote control or the on-screen bar. Press the OK button to finish.
NOTE: The USB storage device will not retain time-shift data after exiting time-shift.
CAUTION: Do not disconnect the USB storage device while time-shift is in progress.
To Next Page
Loading...
