System Setup
-10-
SCREEN SAVER:
If the SCREEN SAVER is set ON and the unit is switched on without a disc
playing for several minutes, a moving picture appears on the screen, and the unit
will go to standby mode after 20 minutes. You can press [STANDBY] key on the
remote controller to wake it up.
LAST MEMORY
When this function is on, the unit can memorize the time elapsed from the last
time you played the disc. When playing next time, it will resume playing from the
memorized time.
AUDIO SETUP PAGE:
ANALOG AUDIO SETUP:
DOWNMIX:
Use [ ] [ ] arrow button to move the scroll to choose one.
LT/RT: The audio out is Left and Right channel format even if the original
sound is 5.1CH format.
STEREO: The audio out format is stereo even if the original sound is 5.1CH
format.
SPDIF OFF: No digital output( coaxial off), only analog audio output .
ALL: If this item is selected, you can set up the RAW.
PCM ONLY: In SPDIF/PCM mode, setup PCM channel according to
your preference.
LPCM OUT :
Select PCM frequency at 48kHz or 96kHz.
Note: Some amplifiers don't support 96kHz sampling which will effect
the coaxial output.
.
DIGITAL AUDIO SETUP PAGE :
DIGITAL OUTPUT:
To Next Page
Loading...
