System Setup
-9-
MENU OPERATION
Press [SETUP] button in the remote controller, the SETUP MENU (main) will
be displayed.
1. After accessing the [SETUP] Menu, press [ ]and [ ] buttons to select a
desired item, then press [ENTER] button to enter the sub-menu. In the submenu,
press [ ]and [ ] buttons to select the desired one, then press the [ENTER]
button to confirm. Now, setup of this current function is completed.
2. To end the setup, press the [SETUP] button again. In the SETUP MENU, you
may choose any of the following options as you like.
GENERAL SETUP PAGE:
This option is used to set up TV screen format, video function and DVD
function, with options of “TV DISPLAY”, , “ANGLE MARK”, “OSD
LANG”, “CLOSED CAPTIONS”, “SCREEN SAVER” and “LAST
MEMORY”.
TV Display
4:3 PAN SCAN: When the unit connects to the normal TV set, the wide-
screen image shows on the full screen ,but some part is cut off.
4:3 LETTERBOX: When the unit connects to the normal TV set, the
wide-screen image shows and black bars appear on the top and bottom
of screen.
16:9: Use this item when the unit is connected to the wide screen TV set.
Wide Squeeze: Use this item when the unit is connected to the wide
screen TV set.
ANGLE MARK:
When a DVD with multiple angles is used, you can select a particular shooting
angle.
OSD LANGUAGE:
You may use this item to set the language of the setup menu and screen display
language.
CLOSED CAPTIONS:
This function doesn’t work if the DVD hasn’t the closed caption. If the captions is
OFF, press [SUBTITLE ]key on the remote controller to make caption on.
To Next Page
Loading...
