-11-
DOLBY DIGITAL SETUP:
Dual Mono:
Stereo: Set audio output to the stereo output.
L-mono: Set audio output to the mono-left channel.
R-mono: Set audio output to the mono-right channel.
Mix-mono: Set audio output to the Mix mono channel.
DYNAMIC:
Select this to reduce the overall volume and still keep defined audio sound.
VIDEO SETUP PAGE:
VIDEO OUTPUT:
OFF: Set video output to the composite.
YUV: Set video output in analog component video format when
connecting to Y/U/V terminals.
P-YUV: Set progressive YUV signals. Connection same as YUV.
System Setup
Note:: If the video setting differs from the physical connection, the TV set may be
without picture. In case of this, you can RESET the machine, then keep pressing
key [V_MODE] until the picture is OK again.
To Next Page
Loading...
