Teac R-5 - Sleep Timer

19
ENG
19
Sleep Timer
The unit can be put in standby after a specified
amount of time.
Press the SLEEP button repeatedly until
desired time appears on the display.
SLEEP 90, 60, 45, 30 or 15:
The unit will be put in standby 90, 60, 45, 30
or 15 minutes later.
Normal Display:
The sleep timer is off.
< The display is dimmed automatically when
the sleep timer is on.
To check the remaining time
Press the SLEEP button once.
The remaining time will be displayed for
5 seconds, and then return to the normal
display.
Snooze
You can put the unit in standby temporarily
after the timer has turned on the unit.
Press the SNOOZE/DIMMER button.
The SNOOZE and ALARM indicator will blink
on the display and the unit enters STANDBY
mode.
After 5 minutes, the unit will turn on again.
You can use this function repeatedly for up
to 60 minutes.
< Press the STANDBY/ON button to stop this
function.