Teac R-5 - Connecting the battery; Battery Replacement

5
ENG
5
Connecting the battery
The battery pack’s connector is not connected
to prevent discharge when you purchase the
unit.
Connect the battery pack before you use.
1. Remove the battery compartment cover.
2. Connect the battery pack.
3. Close the cover.
Battery Replacement
When the batteries are exhausted, replace the
battery pack with a new one.
1. Remove the battery compartment cover.
2. Disconnect the battery pack connector,
and remove it.
3. Insert a new battery pack and attach its
connector.
4. Close the cover.
Caution:
< Do not heat or disassemble rechargeable
batteries. Never dispose of old batteries by
throwing them in a fire.