To Next PageTo Next PageWhat to do if playback sound is unclear on my Teac R-H500?
If the playback sound of your Teac Cassette Player is unclear or wavering, and you're unable to make clear recordings, it's likely due to dirty heads or foreign material on the pinch rollers or capstans. To resolve this, clean the heads as described in the "Head Maintenance" section.
Why does my Teac Cassette Player have strange tone quality?
If you're experiencing a strange tone quality or ragged sound with your Teac Cassette Player, the noise-reduction switch might not be set correctly. Ensure the switch corresponds to the setting used during recording to resolve this issue.
How to fix a Teac R-H500 when tape moves but no sound?
If the tape is moving but you're not hearing any sound from your Teac Cassette Player, there are a couple of things to check: * First, make sure the volume control on your stereo amplifier isn't set to the minimum. Adjust it to your desired listening level. * Second, confirm that the input selector on your stereo amplifier is set to the "tape 1" position.
General| Type | Cassette Deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.8 cm/s |
| Heads | 1 x record/playback, 1 x erase |
| Signal to Noise Ratio (dolby C) | 72 dB |
| Signal-to-Noise Ratio (Normal Tape) | 58 dB |
| Signal-to-Noise Ratio (Chrome Tape) | 60 dB |
| Signal-to-Noise Ratio (Metal Tape) | 62 dB |
| Total Harmonic Distortion | 1.0% |
| Weight | 5.5 kg |
| Motor | DC servo |
| Wow and Flutter | 0.08% (WRMS) |
| Input (Mic) | 0.25mV |
| Dimensions | 290 x 103 x 321mm |
| Power Supply | AC 230V, 50Hz |
