Need help?Do you have a question about the Teac C-3X and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.76 cm/s |
| Heads | 1 x record/playback, 1 x erase |
| Tape Type | type I, CrO2, Metal |
| Type | single compact cassette deck |
| Wow and Flutter | 0.06% WRMS |
| Output | 0.4V (line) |
| Inputs (Mic In) | 0.25mV (mic) |
Measure tape transport reel torque using a torque meter for proper operation.
Adjust pinch roller pressure by separating it from the capstan shaft with a spring scale.
Adjust tape speed using a frequency counter and test tape to meet specified deviation limits.
Measure wow and flutter during playback and record/playback using a dedicated meter.
Verify playback performance including azimuth, phase shift, output level, frequency response, and S/N ratio.
Evaluate recording performance for bias, record bias, record level, frequency response, THD, and signal-to-noise ratio.
Locate adjustment points and test points on PCBs for electrical checks and calibration procedures.
Diagram showing external and major internal components with corresponding part numbers and descriptions.
Diagram illustrating mechanical sub-assemblies, small parts, and their respective part numbers.
To Next Page
