Teac Reference DR-H300 - Setting the Clock

41
ENGLISH
Setting the Clock
If the unit is on, press the STANDBY/ON switch to turn
it standby.
1
Press the VOLUME button to set the current hour.
3
Press the CLOCK button.
4
Press the VOLUME button to set the current minute.
5
Press the CLOCK button.
The clock starts.
6
Press the CLOCK button.
2
(If “- -:- -” blinks on the display, press the CLOCK button
again.)
“CLOCK SET” briefly appears on the display, and the “hour”
value starts blinking.
< If no button is pressed for 10 seconds, the time setting mode
will be cancelled.
The “minute” value starts blinking