Teac AG-5D User Manual

AAGG--55DD
SERVICE MANUAL
AV Digital Home Theater Receiver
Effective : April, 2004 S-0106A
NOTES
●
PC boards shown are viewed from parts side.
●
The parts with no reference number or no parts number in the
exploded views are not supplied.
●
As regards the resistors and capacitors, refer to the circuit diagrams
contained in this manual.
●
£ Parts marked with this sign are safety critical components. They
must be replaced with identical components - refer to the appropriate
parts list and ensure exact replacement.
●
Parts of [ ] mark can be used only with the version designated.
[E]:EUROPE[UK]:U.K.
CONTENTS
1 SPECIFICATIONS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・2
2 ADJUSTMENTS AND CHECKS
・・・・・・・・・・・・・・・・・・・・・・・・3
3 MICROCOMPUTER PIN FUNCTIONS
・・・・・・・・・・・・・・・・・5
4 EXPLODED VIEWS AND PARTS LIST
・・・・・・・・・・・・・・・・・8
5 PC BOARDS AND PARTS LIST
・・・・・・・・・・・・・・・・・・・・・・11
6 INCLUDED ACCESSORIES
・・・・・・・・・・・・・・・・・・・・・・・・・・・24

Teac AG-5D Specifications

General

Tuning range	FM, MW
Power Output	50 watts per channel into 8Ω (stereo)
Frequency Response	20Hz to 20kHz
Total harmonic distortion	0.5%
Input Sensitivity	2.5mV (MM), 200mV (line)
Dimensions	435 x 142 x 353mm
Weight	9.1kg
Speaker load impedance	8 ohms

Summary

Specifications

Adjustments and Checks

AM Adjustment Procedures

FM Adjustment Procedures

Exploded Views and Parts List

Parts Identification List

PC Boards and Parts List

Main PCB (Side A)

Component layout and identification for the Main PCB, front side.

Cinema EQ PCB (Side A)

Component layout and identification for the Cinema EQ PCB, front side.

Main PCB (Side B)

Component layout and identification for the Main PCB, back side.

Cinema EQ PCB (Side B)

Component layout and identification for the Cinema EQ PCB, back side.

Amplifier PCB

Component layout and identification for the Amplifier PCB.

Function and Front PCB

Component layout for the Function and Front PCBs.

DSP PCB (Side A)

Component layout and identification for the DSP PCB, front side.

DSP PCB (Side B)

Component layout and identification for the DSP PCB, back side.

Tuner PCB (Side A)

Tuner PCB (Side B)

S-Video PCB

Power PCB

Headphone PCB

Power SW PCB

ST/BY PCB