Need help?Do you have a question about the Teac AG-V8060 and is the answer not in the manual?
Output power, distortion, frequency response, tone controls, and delay time.
Tuning range, sensitivity, S/N ratio, distortion, and frequency response.
Tuning range, sensitivity, distortion, and signal-to-noise ratio.
Specifies parameters for AM and FM signal generators for adjustments.
Details steps for adjusting FM and AM tuning frequencies.
Steps to adjust FM mono distortion levels.
General| Channels | 5.1 |
|---|---|
| Tuning Range | FM, MW |
| Frequency Response | 20Hz to 20kHz |
| Input Sensitivity | 200mV (line) |
| Video Connections | Composite |
| Weight | 10.5kg |
| Power Output | 80W per channel into 8Ω (stereo) |
| Signal-to-Noise Ratio | 95dB (line) |
| Speaker Load Impedance | 8 ohms |
| FM Sensitivity | 1.8μV (12.8dBf) |
| AM Sensitivity | 300μV/m |
| Type | Audio/Video Receiver |
To Next Page
