Teac SB20204 - Connecting to the Mains Supply; Using the Bluetooth Function; Pairing a Bluetooth Device for the First Time

CONNECTING TO THE MAINS SUPPLY
USING THE BLUETOOTH FUNCTION
1. Ensure that the power supply voltage is in the voltage of 100V~240V. Connecng the unit to
any other power source may cause damage to the unit.
2. Unwind the mains cable to its full length.
3. Connect the mains plug to a mains socket.
4. Make sure the mains plug is fully inserted into the mains socket.
5. Connect the adapter to the unit via the DC input Socket. (DC-12V-IN)
Pairing a Bluetooth Device for the First Time
1. Press the POWER buon on the unit or the POWER buon on the remote control to switch on
the unit.
2. Select and press the MODE buon repeatedly on the remote control unl in Bluetooth mode
or press the Mode buon repeatedly on the sound bar to enter Bluetooth mode.
3. Using the nave controls on your Bluetooth device, select the “SB20204” in your Bluetooth
sengs to pair.
4. When successfully paired and connected, a beep will issue from the unit. Aer inial pairing,
the unit will stay paired unless unpaired manually by the user.
5. If your device becomes unpaired or is unable to connect, repeat the above steps.
Ensure all audio connecons of the unit are connected before connecng
to the mains power socket.
Unplug the power cord from the outlet when the unit is use for an
extended period of me.