Teac SB20204 - Using the MP3 Link Connection (Line In)

USING THE MP3 LINK CONNECTION (LINE IN)
1. Plug one end of a 3.5mm to 3.5mm Line In cable (included) into the Line In port on the unit.
Before use, disconnect any cables connected to the Stereo RCA Inputs.
2. Plug the other end of the cable into the audio output/headphone output on an MP3 player or
other audio source.
3. Press the Power buon on the soundbar or POWER buon directly on the remote control
to switch on the unit. Press the Mode buon repeatedly on the soundbar or press the MODE
buon on remote control repeatedly to enter LINE in mode. Audio played through the
connected device will now be heard through the speakers.
3.5mm to 3.5mm
Line In cable
Audio device
LINE -IN