QUICK SYSTEM INSTALLATION GUIDE
Place the paper guide on the wall where
you want to hang the soundbar.
Locate the screw holes on the paper
guide and mark a point with a pencil.
It is advisable to leave no more than 5mm
between the head of the screw and the wall to
minimize the inclinaon angle of the soundbar
Make the holes with the corresponding
drill bit according to the type of wall.
For a beer sound experience, it is advisable
to place the soundbar at ear level height.
Verify with a level gauge that the inclinaon
angle of the soundbar is zero degrees.
To Next Page
Loading...
