_
7
_
ENGLISH
BEFORE USE
● Choose the installation location of your unit
carefully. Avoid placing it in direct sunlight or close
to a source of heat. Also avoid locations subject to
vibrations and excessive dust, heat, cold or
moisture. Keep away from such sources that hum,
such as transformers or motors.
● Do not open the cabinet as this might result in
damage to the circuitry or electrical shock. If a
foreign object should get into the set, contact your
dealer.
● When removing the power plug from the wall outlet,
always pull directly on the plug, never yank the cord.
● Do not attempt to clean the unit with chemical
solvents as this might damage the finish. Use a
clean, dry cloth.
● Keep this manual in a safe place for future reference.
Connection to a Stereo Amplifier
LINE OUT Terminals
Connect the LINE OUT terminals to the TUNER
terminals of the stereo amplifier using RCA pin plug
cords.
REMOTE CONTROL Terminals
Connect the REMOTE CONTROL terminal A of the Tuner
to the REMOTE CONTROL terminal A of the TEAC
stereo amplifier (A-R600) using RCA pin plug cord.
Remote-controlled Operation
● The remote control unit is not provided with the
tuner as an accessory.
● By using the "UR" remote control unit provided with
the TEAC amplifier (A-R600), the tuner can be
operated.
Power Cord
Be sure to connect the power cord to an AC outlet
which supplies the correct voltage, as set by the voltage
selector.
READ THIS BEFORE OPERATING
Stereo Amplifier (A-R600)
To AC Outlet
To AC Outlet
RCA Pin Plug Cord
(provided)
RCA Pin Plug Cord
(provided)
Tuner
To Next Page
Loading...
Need help?
General
