Need help?Do you have a question about the Teac w-865r and is the answer not in the manual?
General| Built-in microphone | No |
|---|---|
| Reverse | Yes |
| Number of decks | 2 deck(s) |
| Product color | Black |
| Output power description | 120V AC, 60Hz |
Weight and Dimensions| Weight | 4000 g |
|---|---|
| Dimensions (WxDxH) | 435 x 127 x 292 mm |
Avoid water/moisture, ensure ventilation, proper power sources, grounding, and cord protection.
Protect from rain/moisture, avoid liquid entry, prevent fire/shock.
No user servicing, use qualified personnel, safety checks, and FCC compliance.
Connect via RCA cables to amplifier for REC/PLAY.
Identifies buttons, jacks, and display elements on the cassette deck.
Shows the layout and labels of buttons on the remote control.
Explains the function of each button and switch on the main unit.
Explains the function of each button on the remote control unit.
Power on, load tape, set REV MODE, and set Dolby NR switch.
Adjust REC LEVEL knob to O dB at peaks while source plays.
Steps to enter record-pause mode and start recording.
Combine microphone input with an external audio source.
Steps to balance mic input and overall recording levels.
Load tapes, set direction/mode, and start normal or high-speed dubbing.
Load tapes and set REV MODE to two-way.
Press SYNC REV button and DUB START button.
Connect timer, set components, load tape, configure playback modes.
Connect timer, set components, load tape, tune station, configure recording.
Solutions for power not switching on and no sound.
Troubleshooting tips for remote control, noisy playback, and transport buttons.
Solutions for recording failures, poor sound quality, and playback speed variations.
To Next Page
