Team Blacksheep CROSSFIRE Micro TX - Diversity RX; Colibri Fc

5
Make sure you also configure the “Output Map” on the receiver to output CRSF RX on output 7 and CRSF TX
on output 8.
Diversity RX
COLIBRI FC
To use the CROSSFIRE Micro Receiver V2, you have to use the expander board to easily get to the pins for
channel 1 and 2 required for CRSF communication.
In addition to the CRSF serial connection, you might want to connect BST (BlackSheep Telemetry) between
the CROSSFIRE RX and COLIBRI to provide extra telemetry and make changes remotely on the CORE PRO
(if connected) or FPVision (if part of the POWERCUBE).
CROSSFIRE RX
BST ⇒
CORE PRO
BST ⇒
POWERCUBE standard
INT. ⇾
COLIBRI FC
CROSSFIRE RX
BST ⇒
BST ⇒
POWERCUBE FPVision
INT. ⇾
COLIBRI FC
Manual written and designed by ivc.no in cooperation with TBS.