Team Blacksheep CROSSFIRE - User Manual



TBS CROSSFIRE R/C System Revision 2020-10-08
Adaptive Long Range Remote Control System

The TBS CROSSFIRE (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of range
without sacrificing basic functionality such as being immune to interference from onboard equipment, low
latency control or two-way communications including telemetry functionality.
Key features
• Long range, adaptive and robust remote control system for your aircraft
• Immune to on-board noise
• Two-way communication link with real-time link vitals and telemetry
• Self-healing frequency hopping link
• Receiver beacon mode to recover your downed aircraft
• Super easy binding and configuration via built-in OLED display, OpenTX LUA or TBS TANGO remote
• Low latency control for perfect immersive feeling
• Free output mappable outputs diversity
• Ability to fly with multiple friends at the same time (10 or more)
• Dynamic self-selecting or selectable RF power (local restrictions apply)
• Dedicated head-tracking input option for full FPV immersion (Standard/ Lite TX only)
• Transmitter LED shows link health, OLED display for built in configuration (Standard/ Lite TX only)




1


Summary

TBS CROSSFIRE R;C System

Key Features

Lists the primary advantages and capabilities of the TBS Crossfire system.

Specifications

Hardware Overview

Radio Connection Methods

General Functions

Binding, Updates, and Multi-Bind

Procedures for binding receivers, OTA updates, auto-bind, and configuring multi-bind.

Failsafe Setup and Testing

Failsafe Configuration and Testing

Setting up failsafe modes, teaching positions, and performing necessary tests for safety.

Transmission Frequency and Power

Receiver Functions and Status

Telemetry and Communication Protocols

Wireless Telemetry and FC Integration

Setting up wireless telemetry via Bluetooth and WiFi for ArduPilot/PX4 flight controllers.

Receiver Output Mapping

OpenTX Sensor Integration

VTX Connection Methods

VTX Connection via CRSF and SmartAudio

Flight Controller Connection and CRSF Configuration

CRSF Configuration with BetaFlight;KISS;FETTEC

Signal Strength Display

Operation and Troubleshooting

Racing Settings and Factory Reset

Emergency Receiver Update

FLARM System Integration

Team Blacksheep CROSSFIRE Specifications

General

Frequency	868 MHz / 915 MHz
RF Power	100 mW - 2 W
Ports	USB
Updateability	Firmware update via USB
Telemetry	Yes
Battery Voltage	4 - 6 V