Transmitter
First you need to set your transmitter in bind mode. For this you got a variety of options, depending on the
radio and transmitter type you use:
Lua script (OpenTX radio only):
1. Turn on your radio
2. Navigate to the Crossfire lua script and
execute it
3. Open the
Crossfire Transmitter
4. Scroll down to
Bind
and hit enter
TBS Tango 1:
1. Turn on your radio
2. Hold the rocker switch to enter the main
menu
3. Scroll down to
Devices
4. Under
Crossfire Transmitter
5. Click on
Bind
Agent X:
1. Connect your transmitter to the Agent X by
USB
2. Open the Crossfire Transmitter (
Manage
)
3. Navigate to the
Configure
tab
4. Under
Device
, click on
Bind
Button (Micro TX):
1. Power up the transmitter
2. Push the button of the Micro TX once
Oled Display (Standard/ Lite TX):
1. Hold the joystick down till the menu opens
up
2. Open the
Crossfire Transmitter
3. Navigate to
General
4. Scroll down to
Bind
and click on the
joystick
To Next Page
Loading...
